Not what you're looking for? Try this:

Design Wall / Design Wall Lite

Design Wall® is available in straight or tapered blocks, making it easy to build straight walls or sweeping curves without cutting. With the same finished look as Design Wall, Design Wall® Lite (tapered only) is for smaller wall applications. Design Wall automatically slopes back 5° to ensure stability. Design Wall® corner units enable the creation of 90° corners.

Note: Design Wall sizes differ depending on your region. Please contact your nearest retailer for details. Grey, Charcoal, Rustic and Earthtone are only available in Alberta.
Read More...

Colours
Specifications
Installation

Design Wall / Design Wall Lite

Grey - AB only
Charcoal - AB only
Rustic - AB only
Earthtone - AB only
Natural
Terra Cotta Blend
Tumbled Terra Cotta Blend
Chestnut Blend
Tumbled Chestnut Blend
Antique Red Blend
Tumbled Antique Red Blend
Colonial Buff Blend
Tumbled Colonial Buff Blend
Pewter Blend
Tumbled Pewter Blend

Design Wall Specification

Design Wall – Tapered Blocks
Dimensions (h x w x d):	150mm x 200mm x 300mm	5-7/8" x 7-7/8" x 11-7/8"
Weight (Ontario):	19.5kg/unit (1,560kg per 80-unit bundle)	43lbs/unit (3,440lbs per 80-unit bundle)
Weight (Alberta):	17kg/unit (1,224kg per 72-unit bundle)	37.4lbs/unit (2,693lbs per 72-unit bundle)
Coverage:	32.29 units/face m²	3 units/face Ft²

Design Wall – Straight Blocks
Dimensions (h x w x d):	150mm x 200mm x 300mm	5-7/8" x 7-7/8" x 11-7/8"
Weight (Ontario):	21 kg/unit (1,669 kg per 80-unit bundle)	46lbs/unit (3,680lbs per 80-unit bundle)
Weight (Alberta):	17 kg/unit (1,222 kg per 72-unit bundle)	37.4lbs/unit (2,693lbs per 72-unit bundle)
Coverage:	32.29 units/face m²	3 units/face Ft²

Corner B (AB only)
Front face (h x w x d):	150mm x 280mm x 200mm	6" x 11" x 8"
Unit weight:	16kg	36lbs
Units/pallet:	36
Pallet weight:	588kg	1,296lbs
Availability:	Available only in Alberta

Corner A (AB only)
Front face (h x w x d):	150mm x 228mm x 200mm	6" x 9" x 8"
Back face (h x w):	150mm x 150mm	6" x 6"
Unit weight:	14kg	31lbs
Units/pallet:	120
Pallet weight:	1,687kg	3,720lbs
Coverage:	28.74 units/m²	2.67 units/ft²
Availability:	Available only in Alberta

Design Wall Lite (ON only)
Dimensions (h x w x d):	150mm x 200mm x 200mm	5-7/8" x 7-7/8" x 7-7/8"
Unit weight:	11.5kg	25.4lbs
Units/bundle:	120
Bundle weight:	1,382.5kg	3,048lbs
Coverage:	32.29 units/face m²	3 units/face Ft²
Availability:	Available only in Ontario

Design Wall can be constructed up to 122cm (48") high without a landscape grid. With an engineered wall and grid, Design Wall has no height limitations. Design Wall Lite can be constructed up to 61cm (24") or 4 pieces high.
Step 1: Planning
1. Draw a sketch of the retaining wall dimensions.
2. Choose your wall block type and size.
3. Before digging, carefully lay out and mark the area with spray paint. A string line and stakes can be used to further mark the area.
Step 2: Excavation
1. Dig a trench. It should be a minimum 8cm to 10cm (3" to 4") deep by 30cm (12") wide. Add a minimum leveling base of 2.5cm (1") of crushed stone and then compact.
2. Use a tamper and level to ensure a properly constructed base.
Step 3: Install the First Course
1. If water pressure could be a problem, drainage tubing should be installed along the rear face of the trench to allow proper drainage.
2. Lay the first block level on top of the foundation. Level each stone to its neighbouring stone.
3. Use a level to ensure each piece of the first layer is level side-to-side and front-to-back.
Step 4: Install the Remaining Rows
1. Start a second row with 1/2 stone offset, placing each piece tightly together.
2. If your wall is over 91cm (36") high, plastic grid reinforcement should be installed.
3. Backfill the area behind the wall using frost-free granular material and then compact it.
4. If you will be planting behind the top of the wall, cover the backfill with landscape fabric before adding topsoil to the area. Leave a flap of landscape fabric up the back of the wall to ground level to ensure proper drainage.
5. When the wall is brought to final grade, secure the top two courses of stones, including the cap, using butyl tape or a suitable adhesive caulking. (Optional wall coping stones are available.)